Jobsworth Pro Torque Wrench Set

• 2-24NM range
• Quick swap head
• Super accurate torque tube design
• Silent action

High quality Torque Wrench set for professional level applications. The Jobsworth Pro Bike Torque Wrench Set has a wide variety of hex key attachments and a 2-24 NM range, so you can tighten your components to the correct manufacturers guidelines, avoiding damage and costly mistakes along the way. This is especially important for carbon components that have very specific tightening tolerances. The Jobsworth Pro Torque Wrench uses a special torque tube design that does away with the click of less accurate wrenches. When the bolt reaches the correct tension, the shaft of the wrench pivots on the head of the wrench giving you the correct feedback that you’ve reached the correct torque value. Ideal for use on bike stems, headsets, seat clamps, brake lever clamps, chainsets and brake rotors. Top Tip: Try using the wrench with one of the hex key bits clamped into a vice and using a low setting 3-5nm, get a feel for how delicate the action is. NB:The Jobsworth Pro Torque Wrench has a minimum working setting of 2NM. Selecting a value below this level removes the ‘torque limit’ function and could result in overtightening of bolts. Contents: 1/4 inch driver Torque Wrench. Hex Key Attachments: 3/4/5/5-L/6/8/10mm T20 / T25 / T30 drivers. Secure carry case. This Torque wrench is not used for Loosening!